Delft3D Flexible Mesh: Coastal hydrodynamics

Date: 9 December 8:30 – 16:30
Room: 120 Kearny Street, Suite 3100
Costs: $ 450, excluding VAT

Banner-Delft3D-FM-546X146

The Delft3D Flexible Mesh Suite 2016 (Delft3D FM) is the successor of the structured Delft3D 4 Suite. The Delft3D FM Suite can simulate storm surges, typhoons / hurricanes, tsunamis, detailed flows and water levels, waves, sediment transport and morphology, water quality and ecology and is capable of handling the interactions between these processes.

The key component of Delft3D FM is the D-Flow Flexible Mesh (D-Flow FM) engine for hydrodynamical simulations on unstructured and structured grids in 1D-2D-3D. D-Flow FM is the successor of Delft3D-FLOW and SOBEK-1DFLOW.

Like Delft3D-FLOW, D-Flow FM is capable of handling curvilinear grids, that provide very good performance in terms of computational speed and accuracy. Further to that, the grid may now also consist of triangles, quads, pentagons and hexagons. This provides optimal modelling flexibility and ease in setting up new model grids or modifying existing ones, or locally increasing resolution. 1D- and 2D grids can be combined, either connecting adjacent grids or a 1D grid overlying a 2D grid. Both Cartesian and spherical coordinate systems are supported. This facilitates tidal computations on the globe without imposing open boundary conditions. The grid generation tool RGFGRID includes new grid generation and orthogonalization algorithms for the construction of unstructured grids.

Some areas of applications

  • Tide and wind-driven flow;
  • Drying and flooding of inter-tidal flats;
  • Density gradients due to a non-uniform temperature and salinity concentration distribution (density driven flows);
  • Horizontal transport of matter on large and small scales;
  • Hydrodynamic impact of engineering works such as land reclamation, breakwaters, dikes;
  • Thermal recirculation of cooling water discharges from a power plant.

Objective of the course

  • Running a two-dimensional coastal hydrodynamic model using Delft3D Flexible Mesh Suite 2016.

Course subjects

  • Introduction into grid generation for flexible grids;
  • Introduction on bathymetry interpolation;
  • Set-up of hydrodynamic model and running this model;
  • Introduction on postprocessing.

This course is aimed at

Project engineers, project leaders and researchers.

Register here!